Go Girl!........

Well, I didn't get up to my Mum's on Saturday-the white stuff put paid to that!Didn't do much else really which is bad considering how close to The Big Day we are. Still, what isn't done will just have to stay undone! It won't do my blood pressure any good to stress over it all!
Anyhow, onto the card. This one is more or less the same as the previous post, same shape, size etc, but with a few tweaks. I changed the colours to a softer palette using Born To Shop papers.The fab figure is called Kim. The colours that I used are almost the same as in the manual except that I changed her hair colour. I sparkled up her top, skirt and very 70's eyeshadow, and if you look closely she has a belly button stud! Crikey! I cut the sentiment from blue glittercard with a pink shadow which was adhered to the card with foam pads. A ribbon bow, layered bloom and a few pearls complete the outside of the card.

The inside is similar to the previous post except that I covered the inside of the card with coloured paper, then added a punched border and a smaller octagonal panel for a sentiment ( yes, I know that these are OCTAGONAL cards not hexagonal! I never was any good at maths!)
Carts used:
Card base-George
Kim figure & sentiment-Rock Princess
Thanks for visiting today!
Heather xxx

Karaoke Queen.......

I picked up Rock Princess recently and I figured this little lady would make a great card for a karaoke fan. I made a hexagonal card base, cutting 2 shapes and adhereing them together down one side. I covered the card front with hot pink card, then added a smaller hexagon cut from foiled paper from DCWV Rock Star pack. A smaller, matted hexagon with a punched border added was adhered to the card front with foam pads. I added some music print ribbon and a layered bloom.
Now to the little figure...I cut her and assembled her 3 times before I was satisified with the finished result. I have come to the conclusion that it was WAY easier to cut the figure out several times in different colours, then chop the pieces up and assemble her, rather than cut all the itty bitty pieces,lose half of them, cut the beggars out again blah, blah blah......
So I cut the base cut in black,pale pink, & flesh,then assembled her with the addition of the hair and face. I added a heart to the front of the dress (I didn't like the skull that should have been there) and glittered her tights and boots. 'Karaoke' was cut from black glittercard and adhered flat, 'Queen' was cut from silver glittercard, shadowed with black and adhered with foam pads. A smattering of pearls complete the card

The inside of the card was embellished with more foiled paper on a punched border.
Carts used:
Card base- George
Karaoke singer & sentiment-Rock Princess
Thanks for looking! Have a great weekend and I hope the snow stays away! I'm hoping to visit my Mum in the Midlands tomorrow but I'm not sure I'll be able to go if the snow arrives.
Heatherxxx

Dance with your heart......

I told you that I was going to have fun with Nifty Fifties, and I did have fun making this card. I love this jiving girl (there's a boy too!)and I think she looks great in her full spotty skirt with her frilly petticoat underneath!I used Bo-Bunny double-sided paper and a z-fold card. I positioned the girl on a shaped panel which I embossed with a Swiss Dots folder. The front panel was edged with a punched border and the shaped panel adhered over it with foam pads then embellished with a layered bloom and some pearls.

The inside back of the card was decorated with a punched border wrapped with striped ribbon,the sentiment cut from from cream glittercard and brown paper and a punched heart cut from patterned paper. 'Dance' and the heart were adhered with foam pads.I added a plain panel to write a greeting on.
Carts used:
Jive girl-Nifty Fifties
Dance-Wall Decor & more
'with your'-Wall Decor font
Thanks for visiting today!
Heatherxxx

Game on!!.....

Here's a simple card for the gamer in your life! I used a different fold for this card that is really simple to make. Just take a square card (mine is 6 1/4" square) and add a 'zig-zag'piece to it. The zig-zag was made from a strip of cardstock as wide as the base card and scored at 4,8,14 & 20cms plus 1/2 cm for attaching to the base card- see photo below for finished effect. You can make the zig-zags any size to fit your base card..it's up to you!

The game controller was cut from 3 different colours of textured cardstock-black,dark & mid grey-then layered up. Using No2 son's X-Box controller as a guide I added coloured buttons cut from scraps of mirri card. The finished controller was adhered to the second panel with foam pads. I cut 'Game On!'& 'Happy Birthday' from black cardstock shadowed on dark aqua then adhered them with foam pads to the remaining panels. I glittered them up with some black Stickles for a bit of boy-bling! You could add a name to the smallest panel along with the happy birthday if you wanted to.The papers I used are really old Dovecraft papers which fitted the bill nicely!
Carts used:
Game Controller-Wrap It Up!
Game on!-Sports Mania
Happy Birthday-Stamping Solutions
Thanks for visiting!
Heatherxxx

18th Birthday duo.....

First off let me apologise for the quality of the photos..I rushed these cards through on Saturday afternoon and by the time I'd finished them (and changed the name on one of 'em because I'd got it wrong!)it was 4pm and the light was fading fast! I think,though, that you can see enough detail on them.
I used z-fold card bases & DCWV Natural Stack papers. I made them both the same (for speed purposes!) with subtle changes on each card.I used plenty of brown/orange mirri card alternating the colours for matting & layering. The mirri panels holding the numbers were embossed with Cuttlebug embossing folders and I added a 'No Limits' plaque (because when you hit 18 there aren't any are there?!)with foam pads. Some card candy below the names complete the cards.
Carts used:
'18' & names-Nifty Fifties
Happy Birthday-Stamping Solutions
'No Limits' plaques-Graphically Speaking
Thanks for visiting today!
Heatherxxx

Baby-in-a-blanket.....

Here's a couple of baby cards to start the week.I used one sheet of double sided paper for each card (with plenty left over!)along with white textured cardstock from Papermania's Capsule Collection and white glittercard.On the cartridge the gingham blanket holds a rather ugly baby so I cut the blanket on the shift and hand cut a baby (a very simple shape-just head and feet) by placing the blanket on a piece of peach coloured cardstock and drawing around it to create an outline, then I sketched in a baby's head and feet. This was then cut out and the blanket adhered onto it. I embossed a scrap of the pink side of the paper with a baby words embossing folder, which was then adhered to a scalloped panel. The baby-in-a-blanket was then adhered to the panel with foam pads, and then the whole thing was adhered to the front of the card (more foam pads). The inside back of the card was adorned with a gingham, ribbon wrapped and punched border.The sentiment was cut from white glittercard and adhered to the front of the card. Some matt white adhesive 'brads' and a miniature paper rose on the blanket knot complete the cards.
Carts used:
Blanket-New Arrival
Scalloped frame-Just Because Cards
Sentiment-Nursery Rhymes
Thanks for dropping by!
Heatherxxx

Extreme skiing!.....

It's my youngest brother's birthday today! Happy Birthday Nick! Nick used to work in France at a Ski resort a good few years ago, and still skis now, so I thought that as he has a Winter birthday I'd theme my card around winter sports. I used DCWV papers in icy blues and used tones of grey shimmer card for the skier. I used a z-fold card base and positioned the skier so that he is slightly off the front of the card. The skier was shadowed with silver mirri and I used more silver for 'Nick' which was embossed and adhered to the card with foam pads. I added some white glittercard to the blue panel on the front of the card to give the appearance of snow along with the word 'Extreme' cut from 2 shades of grey shimmer card and shadowed with mirri. This was adhered with foam pads.'Happy Birthday' was cut from grey shimmer card and shadowed with silver mirri.I added some silver card candy to complete the card.
Carts used:
Skier & 'Extreme'-Dude Cricut Lite
Happy Birthday-Stamping Solutions
'Nick'- Nifty Fifties
Thanks for visiting today!
Heather xxx